Fiber valves 0.30 x30 / ka100 Iame (The game) (173) (68)

Why choose the 0.30 mm fiber valves?

1. More "round" engine: The flexibility of the fiber allows a more progressive bottom filling, making the kart less brutal to the re-acceleration.

2. Increased reliability: Fiberglass is less prone to brutal erosion than carbon. It thus preserves your cylinder in case of marked wear.

3. Setting tolerance: The 0.30 mm valves are more forgiving small carburetor adjustment deviations, offering a more constant engine over the duration of a handle.

4. IAME compliance: Performance standards part for Junior, Senior and Master categories.

? Michel's trick

"The 0,30 mm in fiber is the base! If you find that your engine is too much 'on / off' or it galley to resume in the tight pins, returned on fiber. My advice of old briscard: when you go up, checks that the most side smooth lamella is well against the pyramid. And be careful at sense of stops ! Do not spread them too much, otherwise you will tire the fiber prematurely. If you see that the edges are starting to become translucent or that they are crumpling, change them directly before a piece decides to visit your piston! "

? Maintenance Guide

• Inspection: To check every 10 to 15 hours of rolling.

• Sealing test: Once mounted on the box, the valves must be perfectly plated on the support. If you see the day pass, the tightness is no longer ensured.

• Mounting: Clean the support perfectly with brake cleaner before laying the new slats.

✅ Technical characteristics

• Material: High performance fiberglass.

• Thickness: 0.30 mm (standard thickness).

• Packaging: Sold by set of 2 slats.

• Compatibility: Iame X30 (Senior / Junior / Master) and KA100.

Note Magickart: For admission to the top, do not forget to order the 90mm valve box seal. A nine valve on a fugitive seal will not serve anything!